Customized solutions
Together with our customers, we also develop dedicated solutions for hardware & software when standard products cannot meet the requirements, thus connecting the physical world with the digital world
RFID Reader & Encoder
For all types of authentication or authorisation you need in your company, we offer secure and flexible hardware solutions. With powerful RFID hardware from ELATEC as well as our competent consulting and software solutions, we optimally master your individual challenges.
Our read/write devices support more than 60 different technologies simultaneously.
They combine low frequency, high frequency, NFC and BLE in a single device.
Our readers are optionally available in many designs, e.g. as modules, OEM boards or built into an attractive housing.
No matter whether they are needed for standalone or host-controlled operation.
We cover a wide range of physical interfaces with evolutionID RFID readers:
USB, RS232, RS485, Wiegand, TTL and many more. This gives you maximum flexibility for a wide range of applications.
On request, we can create customised firmware for the hardware to enable data output of the relevant memory area in the desired format with the required interface. In this case, you get a “plug and play” device.
Together with our customers, we also develop special solutions for hardware & software when standard products cannot meet the requirements and thus connect the physical world with the digital world. Let us consult with you!
TWN4 MultiTech 2 LF HF
The classic Elatec device combines RFID (125 kHz, 134.2 kHz and 13.56 MHz), NFC and optional BLE capabilities in one powerful read/write device.
Its excellent read/write performance makes the TWN4 a perfect module when little space and high technical performance are required. For example, in printer solutions, healthcare applications, driver identification, POS integrations, etc.
In addition, the TWN4 MultiTech 2 provides access to the most common host interfaces such as USB, serial TTL or I²C.
These are easily accessible via an on-board connector.
Features:
- Supports more than 60 different RFID technologies
- powerful SDK
- upgradable in the field
- internal 18 kB data memory
- Support for direct chip commands
- on-board Secure Access Module (SAM) slot
- CCID and PC/SC 2.01
- Fast, centralised (re-)configuration via network or with TWN4 CONFIG Card
TWN4 Slim
The TWN4 Slim RFID reader is suited for installation in computers and devices, especially MFP printers with optional snap-on and snap-off covers. It supports all common standards for LF and HF technologies and is also the smallest and most compact reader in the TWN4 family. Smartphone ID solutions such as NFC and Bluetooth Low Energy (BLE) are already integrated and this LEser can be used for mobile use cases in data communication and authentication.
Features:
- seamless integration with printers and other industrial applications
- powerful SDK
- integrated LF and HF antennas
- integrated 2.4 GHz BLE, BLE v4.2, upgrade possible
- flexible cable with standard micro USB connector
- multiple protocols, including CCID and PC/SC 2.01
- one slot for Secure Access Module (SAM), ID-000 form factor
- optional mounting holes for easy and quick installation
- fast, centralised (re-)configuration via network or with the TWN4 CONFIG Card
- TWN4 Upgrade Card for options P and PI on request
- support of direct chip commands
- Customisable design insert
TWN4 Palon Compact Panel
The TWN4 Palon Compact Panel is a versatile device-mount reader for integration with third-party products and devices.
The RFID hardware supports a variety of interfaces, especially RS-485 and RS-232.
The new Palon Compact Panel offers the well-known advantages of the ELATEC TWN4 family and also supports various tools.
The IP65-rated housing and integrated antennas ensure first-class and reliable performance in contactless operation.
An integrated BLE module also supports a variety of mobile identification and authentication solutions.
If you don’t need the BLE functionality, we offer a Light version that does without this feature.
Features:
- optimised housing design for fast and secure installation
- powerful SDK
- integrated LF and HF antennas
- one on-board Secure Access Module (SAM) slot
- Interfaces: RS-485, RS-232, Wiegand, Clock/Data
- OSDP protocol optionally available
- fast, centralised (re-)configuration via network or with the TWN4 CONFIG Card
- support of direct chip commands
- integrated 2.4 GHz BLE module, Bluetooth® v4.2, upgrade possible
- Firmware update possible at the installation site
- 18 KB on-board flash memory
- TWN4 Upgrade Card for P and PI options on request
- Customisable kit configurations on request
What can we do for you?
Benefit from our long-standing experience in the fields of RFID, multifunctional ID media and digital identity!
Just get in touch with us!
Badge & ID-card printer and consumables
We only use and recommend high-quality and flexible card printing solutions from well-known and established manufacturers, primarily Magicard.
Magicard offers high quality and flexible card printing solutions that cover all your card printing needs. The devices are ideal for printing high-quality cards, from visual IDs to access control and cashless payment cards.
The printers are available with network interface or USB connection. We equip the badge encoders with an RFID encoding unit for electronic personalisation, controlled directly via IDfunction. The devices are suitable for TRW printing, colour dye-sublimation printing and high-quality retransfer printing. The print output is single or double-sided, with or without individual security features.
Depending on the model, the printers are suitable for use cases with low badge production frequency, but also for complex requirements with a demand for hundreds of badges per day.
Magicards Ultra Cover warranty offers a comfortable 5 year service for all users, while expanding warranty and service for those high quality products.
Magicard 300 (direct printing technology)
Robust, durable, reliable and equipped with Digital Shredding (TM), the Magicard 300 is perfect for schools, colleges and medium-sized businesses printing up to 10 000 cards per year. When it comes to secure ID card printing, you can rely on the Magicard 300.
With the Magicard 300 you can print at a resolution of 300 x 300 dpi in monochrome. This is ideal for printing photos, company logos, other images and black personalisation.
Via USB, the Magicard 300 can be quickly and easily integrated into the existing infrastructure, minimising set-up time and requiring little technical know-how. Updates and upgrades are also very easy to install. The 300 prints each single-sided, full-colour card with HoloKote® in under 23 seconds. A monochrome version takes less than 6 seconds. The Magicard 300 allows you to print up to 720 cards per hour in monochrome.
Feratures:
- Digital Shredding™ (scattering of information once it has been used for a print job)
- HoloKote® (security watermark printed over the entire card surface)
- HoloPatch® (an add-on for HoloKote® to print a highly visible golden security seal on special cards)
- Ethernet connection (next to the USB interface)
- 3-year warranty on the hardware
- TRW printing for the rewritable cards
Magicard 600 (direct printing technology)
The Magicard 600 is a premium card printing solution that offers faster print speeds, stringent security and the finest print detail. With the Magicard 600, you print up to 600 x 300 dpi in monochrome. This makes even microtext very legible. Prints look more colorful and vibrant because the 600 offers a wider color gamut – perfect for your photos on ID badges and a more detailed look for logos and graphics – premium, best-in-class quality you’ve come to expect from Magicard.
Features:
- Digital Shredding™ (scattering of information once it has been used for a print job)
- Print resolution 600 x 300 dpi (so that text is legible at small font sizes (≥5 point))
- High print speed (up to 190 full colour cards per hour)
- HoloKote® (security watermark printed over the entire card surface)
- HoloPatch® (an add-on for HoloKote® to print a highly visible golden security seal on special cards)
- WiFi and Ethernet connectivity (in addition to the USB interface)
- 3-year MagiCover Plus warranty
- TRW printing for the rewritable cards
Magicard Prima 8 (retransfer printing technology)
Using retransfer printing technology, the Prima 8 retransfer card printer quickly produces high-quality photo cards in high volumes, comparable to offset litho printing.
The Magicard Prima 8 offers a reliable, robust hardware solution for instant output and lamination in a compact package. Using the retransfer printing process, images are first printed on a thin film and then heat transferred to the card surface. This creates a high-resolution, glossy image that is printed directly over the edge of the card.
Features:
- high-volume photo-quality printing
- trusted electronic security
- customizable stealth security
- automatic Feeding system
- encoding options for a one-stop-cardproduction (printing & encoding in one step)
- WiFi and Ethernet connectivity (in addition to USB)
- single and double-sided printing
- option: can be equipped with a laminator
Our software products
Link to: Software ID-Management
Intelligentes ID-Management evolutionID – ID-Management
Link to: Software ID-Management
AI based photo acquisition evolutionID – ID-Management
Link to: Software ID-Management
RFID coding tool evolutionID – ID-Management
Link to: Software ID-Management
Mobile credential solution evolutionID – ID-Management
Link to: Software ID-Management
Analysis tool for RFID media evolutionID – ID-Management
Media & consumables
RFID badges of all technologies, HF and LF (125kHz or 13.56 MHz) are used in our projects.
Processor badges such as the Smart MX badge with native support for Mifare DESFire and applets such as the versatile Legic Advant) are highly valued by our customers.
Dual-interface and hybrid badges (mixed technologies) are our expertise. Combinations of CTC (Legic Prime + Advant) and other technology combinations on request, e.g. Mifare DESFire + EM4102 offer a great advantage when migrating from one badge generation to another.
For more information on the various technologies, please visit our knowID-section on this website.
Accessories for badges
- Identity card sleeves and holders
- Jojos
- Fasteners and clips
- lanyards
ID cards / badges
- Plastic cards (print only)
- RFID badges
- Legic
- Mifare (Classic, DESFire EV1/EV2/EV3, Ultralight…)
- Hitag 1/S, 2
- EM4x02
- TRW badges (rewritable)
Various media shapes
- Key fobs with free choice of logo, printing and technology
- Beacons (BLE key fobs) and fobs
- Stickers, labels & tags (RFID stickers)
Card printer consumables and options
- original Magicard ribbons
- cleaning kits and supplies
Consumables for ID card-printer
We supply only genuine ribbons and consumables for card printers to our customers to ensure the best possible print result and smooth card production.
Genuine Magicard consumables meet strict quality standards and deliver consistent printing results.
Company Blog:
Release Notes für IDfunction Web 2.1.07. November 2023 - 6:08
Strategic partnership evolutionID and CoreWillSoft22. June 2023 - 6:30
SicherheitsExpo München 202324. May 2023 - 6:15
Release Notes for IDfunction Web 2.017. May 2023 - 6:08
ID-Management – Things you should know about it27. April 2023 - 5:47
PIAM the smart way10. March 2023 - 15:37
Partner:
 |
 |
 |
|